Currency converter
Obtain accurate foreign currency conversions to facilitate customs valuation and regulatory compliance for your declarations.
En quelle langue voulez-vous consulter ce site ?
Find the answers to all your questions about ICS2ICS2 (Import Control System 2) is the European Union’s IT system for transmitting pre-customs clearance declarations for goods imported from third countries. …, the EU customs declaration under the UCCThe Union Customs Code (UCC) is the European regulation that harmonises all customs rules and customs procedures across EU member states. … and Toldstyrelsen’s DMS Import and DMS Export systems, and much more, on this page!
Our customs FAQ aims to provide you with all the information you need for the seamless management of your customs operations and import-export processes.
What is the DMS IE procedure? What are its specific features? Legal basis, stakeholders, processes, etc.: find out everything you need to know.
DMS Import and DMS Export concern all economic operators importing goods into, or exporting goods from, the EU customs territory via Denmark, as well as their customs representatives.
It also covers trade between Denmark and the Faroe Islands and Greenland, which are outside the EU customs territory.
DMS (Declaration Management System) is the IT system used by the Danish Customs Agency (Toldstyrelsen) for import (DMS Import) and export (DMS Export) customs declarations under the Union Customs Code (UCC).
DMS Export replaced e-Export on 1 May 2024. DMS Import replaced Importsystemet, which no longer accepts new import declarations since March 2026.
As the Union Customs Code (UCC) mandates the modernisation, standardisation, and digitalisation of tomorrow’s customs, a new customs declaration was necessary to:
H1 = Import Declaration
B1 = Export Declaration
H7 = Import Declaration for e-commerce
The SADThe SAD was an EU customs form that contained the information required to declare goods for import, export, and transit. … as an operational format (boxes 1 to 54) is no longer the reference standard in the EU since the implementation of the Union Customs Code (UCC). The SAD no longer legally exists as a mandatory format.
From an IT perspective, the data of the new customs declaration is structured into 3 segments:
D – Data elements required at the generic declaration level
GS – Data elements required at the goods movement level
SI – Data elements required at the item level
11. Message information (including procedure codes)
12. References of messages, documents, certificates and authorisations
13. Economic operators
14. Valuation information/Duties and taxes
15. Dates/Times/Periods
16. Places/Countries/Regions
17. Customs offices
18. Identification of goods
19. Transport information (modes, means and equipment)
99. Other data elements (statistics, guarantees, tariff data)
The data contained in the former box 44 of the SAD is distributed among the different thematic data groups. Its content has been dispatched and is now better organised.
For example, special mentions are now in thematic group 12, dedicated to documents, certificates and authorisations.
Additional codes are now in thematic group 18, dedicated to the identification of goods.
Yes. Declarations are not transferred between systems: a declaration lodged in the old system must be completed, amended or invalidated in that system, and a declaration lodged in DMS is managed in DMS.
Under Article 173(3) UCC, an amendment can be requested after release of the goods within three years of the date of acceptance of the declaration.
Firstly, you file a simplified declaration (SD) with a minimal set of data, then, within a period specified in your authorisation, you file a supplementary declaration (SD) covering all required data and accompanying documents.
Each declaration (SD – Simplified Declaration and SD – Supplementary Declaration) receives its own unique declaration number.
The MRN of the simplified declaration must be entered as the previous document in the supplementary declaration.
Yes, the MRN of the SD must be included as the previous document using the code “NMRN”.
A supplementary declaration includes at least all the data from the simplified declaration without modification and is enriched with other data and the required accompanying documents.
3 types of supplementary declarations are offered:
According to the recommendations of the EUCDM, an SD can contain up to 9999 SDs.
A 1-step declaration (or standard declaration or former common law declaration) includes all data necessary for customs clearance.
A 2-step declaration (or simplified declaration) contains a reduced data set.
This simplified declaration (SD) must be reconciled with a supplementary declaration (SD) which contains all the data of a customs declaration. This filing must be made within a deadline, defined in the simplified declaration authorisation (daily, decadal or monthly).
These two customs clearance modalities have been available since the implementation of DELTA I/E.
No, any modification to a validated supplementary declaration is impossible.
However, it is permitted to make a request for rectification or invalidation of the supplementary declaration.
MRN stands for Movement Reference Number.
DMS Export has been mandatory since 1 May 2024. Importsystemet closed for new import declarations in March 2026, and all new import declarations are now lodged in DMS Import.
If DMS is unavailable, Toldstyrelsen’s contingency procedure applies to import and export declarations. Contact us for details on how it works.
The payment of duties and taxes is made:
– either during the supplementary declaration (general, periodic or summary)
– or with deferred payment under the usual deferred payment conditions
Lodge a simplified declaration without the missing document(s), then add them to the supplementary declaration once received.
An authorisation for the simplified declaration procedure is required. A standard (1-step) declaration does not allow deferred production of documents.
Comprehensive guarantee authorisations (CGU) are managed in the EU Customs Decisions System (CDS). Older authorisations may need a new application, as the CDS form contains new sections.
Accrued debts are customs debts that have already been incurred (for example, duties under deferred payment). Potential debts are debts that may arise (for example, goods in a special procedure or in temporary storage). The comprehensive guarantee must cover both.
Holders of an AEO-C authorisation may obtain a reduction of the reference amount to 30% for accrued debts, and a waiver (0%) for potential debts, subject to Toldstyrelsen’s authorisation.
No. Valuation data previously given in the DV1 form is now entered directly in the customs declaration in DMS.
AES (Automated Export System) replaces ECS (Export Control System). It monitors the actual exit of goods from the EU customs territory, validates the export and secures export flows. In Denmark, it is handled through DMS Export.
The main changes in the exit monitoring process are:
• The dematerialisation of the EAD (Export Accompanying Document);
• The introduction of a storage exit notification filed by economic operators;
• The possibility for economic operators to enter discrepancies, and for exit offices to identify discrepancies at several stages of the exit process
What is the Import Control System 2? What are its specific features? Legal basis, stakeholders, processes, etc.: discover everything you need to know about ICS2.
The European Union has implemented the security and safety programme for risk analysis of goods before their arrival in European territory.
Version 1: pre-loading of air express
Version 2: air freight
Version 3: maritime, rail, road, waterways
All goods transported by air, express or cargo are concerned by the declaration to be produced before loading, by the provision of a complete ENS declaration before the arrival of the goods.
ENS – UCC = 127, 129, 130, 136 – Delegated Regulation: data defined in Annex B. All EU Member States are concerned.
Yes, ICS2 also applies to Switzerland and Norway. Within the framework of the Northern Ireland Protocol, Northern Ireland is also concerned by ICS2.
Yes, see the Delegated Regulation, the data defined in Annex B of the UCC Delegated Act defines the expected data (formats and codifications).
The SAFE via conex™ solution has this connection designed to exchange EDI messages with a European IT system.
Data can be entered on the application, which consists of a user interface that facilitates the declaration to be prepared.
Once you have an EORI, consult Conex who will tell you what steps to take as an economic operator.
ICS2 consists of several steps.
Step 1: the “pre-loading” message must be completed as early as possible and at least before the aircraft is loaded.
Step 2: the complete ENS declaration must be completed before the aircraft arrives.
Step 3: the arrival notification must also be transmitted.
This is an electronic transmission only. This can be done through the SAFE via conex™ pre-customs clearance software.
Member States support economic operators in their efforts related to conformance tests. DG Taxud is the provider and owner of the application known as STI. This directorate has developed the functional and technical specifications. DG Taxud is involved in the testing phases. It also provides training materials. These are also the economic operators composed of different types of actors in the logistics chain such as carriers, freight forwarders and IT solution providers.
The carrier is responsible for completing and submitting the ENS (Article 127(4) of the UCC). If they do not have all the requested information, the missing information can be provided by other economic operators in the logistics chain.
Importers, exporters, carriers, handlers, logistics providers and customs representatives.
If customs has not received the required data under ICS2, they may decide to stop the goods, at a minimum.
Detailed information is required under ICS2. Be prepared to provide customs codes by type of goods.
Customs codes of a minimum of 6 digits and a maximum of 8 digits per product type will be requested. A detailed description of the products is also required.
Yes. The Conex solution will allow you to know the status of each message and will return the MRN. Also refer to the new RFI, RFS or DNL features.
Multiple filing means that the declaration is composed of several actions consisting of completing it in several stages according to two types of data sets, or even more.
Master filing is generally submitted by the carrier.
Other involved parties, such as the freight forwarder, can intervene at the House filing level.
The different scenarios are defined by the European Commission.
Carriers and freight forwarders (FF) need to anticipate and clearly define agreements on who will transmit which message at what time based on what data.
If the loading information reveals a clear threat situation.
Mainly in English.
All parties who have submitted information receive a message in case of DNL.
Yes, both economic operators entering data at the House level and those entering data at the Master level can use the Conex solution to exchange with the first country of entry into the EU.
If the risk analysis of an EU country raises issues related to goods transported by air or by sea in containers, a notification in the form of a “referral” can be sent to the economic operator. If customs considers that the information received from economic operators is insufficient, they can request additional information to refine their risk assessment.
Types of referrals
If the data provided is not sufficient, customs sends an RfI (Request For Information). If the customs authorities need better quality information, they are likely to send an RfA (Request for Amendment). If they detect a risk, they can send an RfS (Request for Screening). Finally, if the risk is confirmed, the EO will receive a DNL.
Yes, in this case the type and number of the document will be requested.
The EO must send a response by choosing from a series of codes such as ‘A00’, ‘B00’, ‘B01’, ‘C00’, ‘C01’, ‘D00’, ‘D01’, ‘D02’, ‘S00’ and ‘S01’. Textual information is also possible in combination with the codes.
If a consignment (cargo or postal) is considered high risk, customs may request a screening to complete the initial risk analysis of the pre-loading phase.
Depending on the case, the EO can provide information that the screening has been carried out and report on the result obtained. The EO can also commit to carrying out the screening if it has not already been done and communicate the result. If the goods are no longer on the EO’s premises, the latter and customs agree on the best-equipped location to carry out this screening.
The economic operator who provided the required data will receive information from the customs authorities clarifying that the risk assessment has indeed been completed.
It is an application for managing and securing access to various portals made available to economic operators by the EU.
If the economic operator uses a Conex solution, there is no need to identify themselves on the portal. Conex, considered as a “sender” (ITSP), handles all details related to electronic exchanges. Do not hesitate to contact us for more information.
No, certificates are managed by Conex.
The central DG Taxud helpdesk is only there to assist national services with unresolved national tickets.
Yes, this list established by the EC is updated regularly. Poor descriptions can generate unvalidated ENS.
No, this case is one of the exceptions.
Certainly, and increasingly so. Remember to define which EORI and HS codes will be declared, right from the transport booking phase.
Greater interaction between supply chain economic operators is required to clearly define everyone’s role. You must also ensure the consistency of this risk analysis with the management of customs processes that follow ICS2.
Yes, a solution such as SAFE via conex™ allows real-time visualisation of the statuses attached to each ENS and therefore to act accordingly.
The Conex solution allows for immediate Go-live, with no prerequisites. If the volumes of flows to manage require the implementation of the Conex API, consult our teams who will advise you on the most suitable automation for your context.
Obtain accurate foreign currency conversions to facilitate customs valuation and regulatory compliance for your declarations.
Consult customs exchange rates for major currencies, updated monthly, and their history.
Easily find the correct codification for your international trade.
Determine the customs duty rate applicable to your goods according to the European Harmonised System.
Discover the meaning of all customs acronyms and master the customs jargon!
The solution for security and pre-customs clearance formalities, connected to European and British customs systems.
The SaaS software connected to European systems to automate, secure, and manage your customs declarations.
The Customs Encyclopaedia that centralises all regulatory information necessary for the tariff classification of goods.
The international collaborative customs platform that centralises, organises, and archives all data, documents, and messages related to customs procedures.